About our Pricing
We Play Paintball Just Like You
We understanding how much paint, field fees, air & gear costs you. We understand how our favorite hobby can can add up quickly and the flack you get at home from spending that money. We keep our prices in a reasonable range for what we do. We know you try to cut a few corners and save a few bucks here and there. Even that really bad marker you got off eBay for what seemed like a good deal at the time. Instead of tossing it on the shelf lets us fix and tune it so it works like it suppose to. Tried of chopping balls? Can't seem to get your maker zeroed in? Using way too much air then the marker should? Selling a marker and want to make sure it's 100% before you post it on the board? We will even post that we looked it over and gave it our seal of approval. This alone will increase what people are willing to pay for your used gear. The sport we play gets expensive. Go out on the field with gear you know will be there for you when your about to be bunkered and your opponent is in your sights.
Our pricing
The Master Airsmith features a repair shop with 3 fully equipped repair stations and manufacturer certified technicians.
Our head tech is factory certified from Angel, BT, Dye, JT, Viewloader, Planet Eclipse, Spyder, Luxe, Tippmann, Angel, Kee, Kingman, and Smart Parts, Pure Energy, WGP, RAP4.
Why pay for parts that are not broke?
We are professionals and the certifications above as well as specialized test equipment we use has cost thousands of dollars to acquire. Some of the equipment we have was constructed just for us to restore your marker to factory new condition and pressures. We don't tear down markers and just start replacing parts. We diagnose you exact problem(s) and fix just that. That means less time in the shop and a lower cost for you. Most repairs are done quickly, tested, and shipped back out the same day.
If your Paintball gun needs parts, we more than likely have it or can get it for you. We often times have or can even get those old hard to find parts. Maybe you just want your gun looked over and serviced by a professional before your next big game - We can do that too. A typical preventative service includes fresh seals in all of the high wear locations, a fire chamber, HPR, and LPR cleaning (if applicable), ball detent check, and a fresh lubrication. Our Pro-Shop regularly services all brands and models of paintball markers and hoppers. If you can ship it - we can fix it.
If your gun needs parts totaling more than $10 to repair it, we will contact you for authorization before proceeding.
If your gun is gummed up with crap paint like that found at large chain department stores, you can expect to be charged an additional $10 service fee. Junk paint like that is not only a waste of your money, but it gunks up your gun and is extremely hard to clean out - hence the extra charge. We will contact you if we find said situation before we proceed.
When sending your gun to us, send the gun only and barrel. We do not need your tank, or hopper. Be sure to pack it with plenty of padding to ensure no damage occurs in shipping. Be sure to include your name, phone number, full return address.
The Master Airsmith is not responsible for damage or loss incurred during shipping or for minor tools marks made (rare) that are necessary to the repair.
The Master Airsmith will return your gun once finished and paid for. The return shipping fee will be added to your total bill (usually less than $12).
Need It FAST?
Expedited services are available and will incur additional fees. Contact Us for more information.
Paintball Gun Repair -
The Master Airsmith is staffed by certified tech's that have been trained by the Manufacturers of the products. The Master Airsmith is authorized by the manufacturer to perform repair and maintenance on all paintball guns without voiding any warranties. The Master Airsmith tech staff has the knowledge and experience to repair and maintain your paintball gun properly. Some electronic guns require diagnosis by computer and the tech's at The Master Airsmith have been provided the software and cables to perform these types of services. The Master Airsmith maintains "on hand" inventory of repair parts supplied by the manufacturer to expedite warranty repairs and non-warranty repairs.
Gun Cleaning and Maintenance -
The Master Airsmith experienced staff can disassemble, thoroughly clean, and perform routine maintenance to ensure our gun works at its peak potential. Ask a Master Airsmith associate how we can "tweak" your gun to improve it's performance and your game.
Tank Repair -
The Master Airsmith staff has been trained and certified to repair all brands of high pressure air systems. Working with High Pressure can be very dangerous and the tech staff of The Master Airsmith have been safety trained repair all air systems. The Master Airsmith staff can also repair C02 tanks.
Electronic Feeder Repair: The tech staff of The Master Airsmith has been trained by the manufacturers to repair electronic feeders/hoppers. The Master Airsmith maintains "on hand" warranty parts to repair electronic feeder systems.
The Master Airsmith Service Fee's & Rates
All Upgrades purchased from The Master Airsmith can be installed by our technicians at no additional charge. Any upgrade installed by our technicians is covered under the The Master Airsmith warranties. Upgrades that are purchased from The Master Airsmith and installed by the player are not covered by our warranty policies.
The following service fees and labor charges apply to all markers in for service and/or upgrades to be installed that were not purchased from
The Master Airsmith:
Bench Charge - $60
Includes lubricants and Orings used to fix marker. Applies to labor charges should the repairs take more than one hour. Does not apply for installation of upgrades that were not purchased from The Master Airsmith.
Standard Hourly Labor Rate- $60 per hour
Marker Tune Up, Timing and Performance Check - $30
Includes lubricant, oring replacement if needed, performance check and chronographing to 280fps. Also includes both HP & LP regulator adjustments (balancing) for Intimidator, EGO, ETeK, Autococker, Quest, DM, PM, PMI & other markers that use a solenoid low pressure regulator.
Upgrade Installation Charge - $15 to $25 depending on the upgrade and marker
Includes installation and testing of the upgrade component, chronographing to 280fps and basic performance check. The Master Airsmith does not guarantee the performance increase of any upgrade component due to the numerous ways a player may set-up their marker, which can effect the level of performance gained from any installed upgrade. This fee does not apply if the upgrade component was purchased from The Master Airsmith. Upgrade components purchased from The Master Airsmith are installed free of charge and warranted by our technicians for operation.
Body Modifications - $50 to Varies
(This fee applies to all markers, even if purchased from The Master Airsmith)
This fee is for custom modifications that require the use of our drill press or other machinery. Such modifications (such as drilling the eye holes and mounts on an autococker) are extremely delicate procedures and the process is warranted by The Master Airsmith should accidental damage occur during modification.
PRESSURE VESSELS ( Air Tanks )
Tank Repair - Price-$10 + Parts cost
Working with High Pressure can be very dangerous and the tech staff of The Master Airsmith have the knowledge to safely work on and repair your high pressure air system. The Master Airsmith's staff can repair C02 tanks as well.
Electronic Hopper Repair
Electronic Loader Repair - Price-$10 + Parts cost
The tech staff of The Master Airsmith has been trained by the manufacturers to repair electronic feeders.